Analyzing the synthesis route of 1121-83-1

1121-83-1, This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 1121-83-1. We look forward to the emergence of more reaction modes in the future. 1121-83-1

One of the major reasons is to use measurements of the macroscopic properties of a system, the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 1121-83-1, introduce a new downstream synthesis route., 1121-83-1

The synthesis of 5,5-Dimethyl-oxazolidin-2-one as depicted in the above scheme followed the procedures disclosed in: Bull, S. D.; Davies, S. G.; Jones, S.; Sanganee, H. J. J. Chem. Soc. Perkin Trans. 1 1999, 4, 387.To a 250 mL dry round bottom flask were added 5,5-dimethyl-oxazolidin-2-one (5.10 g, 44.3 mmol), triphosgene (5.26 g, 17.7 mmol) and anhydrous THF (80 mL). The mixture was stirred in an ice-water bath, then triethylamine (8.6 mL, 62.0 mmol) was added slowly. The resulting mixture was stirred at room temperature overnight. The reaction mixture was filtered and the filtrate was concentrated. To the residue was added 2,6-difluoro-4-hydroxybenzaldehyde (5.03 g, 31.9 mmol) and 80 mL of CH2Cl2. The resulting solution was cooled in an ice-water bath, then triethylamine (6.0 mL, 42.5 mmol) was added. After stirring at room temperature for 7 hours, water (100 mL) was added to the reaction mixture. The CH2Cl2 layer was separated, and the aqueous layer was extracted continually with CH2Cl2 (50 mL¡Á3). The combined CH2Cl2 solution was dried over Na2SO4. After removal of the solvent, the residue was purified with a silica gel chromatography (heptane/ethyl acetate, gradient eluting) to give 3,5-difluoro-4-formylphenyl 5,5-dimethyl-2-oxooxazolidine-3-carboxylate (6.9 g) as a pale yellow crystal. Yield: 52%. 1H NMR (CDCl3, 300 MHz): delta=10.39 (s, 1H), 7.09 (d, J=9.0 Hz, 2H), 3.97 (s, 2H), 1.67 (s, 6H).

1121-83-1, This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 1121-83-1. We look forward to the emergence of more reaction modes in the future. 1121-83-1

Reference£º
Patent; WARNER CHILCOTT COMPANY, LLC; US2011/98251; (2011); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

New learning discoveries about 99395-88-7

Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol. 99395-88-7, if you are interested, you can browse my other articles.

99395-88-7, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.(S)-4-Phenyloxazolidin-2-one, cas is 99395-88-7, below Introduce a new synthetic route.

(S) -3-oxo-3- (2-oxo-4-phenyloxazolin-3-yl)Propionic acidEthyl ester,The structure is as follows:In a 500 ml three-necked flask,Join(S) -4-phenyl-2-oxazolone(0.122 mol, 1 eq.) AndDichloromethane 200 ml,Cooling to between 0 and 10 C,16 g (0.146 mol, 1.2 eq.) Of the TMSCl starting material was added,The mixture was stirred at 0 to 10 C for 30 minutes,15.4 g (0.152 mol, 1.25 eq.) Of triethylamine was added dropwise,Dropping process control material temperature between 0 ~ 10 ,After completion of the dropwise addition,Stirring was continued at 0 to 10 C for 2 hours((S) -4-phenyl-2-oxazolone TLC detection reaction was completed (TLC detection conditions:Petroleum ether / ethyl acetate = 2/1).Then 36.8 g was addedMalonic acidMonoethyl ester chloride (0.245 mol, 2 eq.) Was added dropwiseProcess control of material temperature at0 to 10 C,After completion of the dropwise addition,0.2 g of anhydrous tetrabutylammonium fluoride (TBAF,Gt; mmol, 0.005 eq.),The reaction solution was stirred at room temperature for 2 to 5 hours.After completion of the reaction,The reaction solution was poured into 200 mlIce-water, and the mixture was stirred at room temperature for 30 minutes,The organic phase was separated and the organic phase was washed with 10% sodium carbonate solution,The organic phase was separated and the organic phase was evaporated to dryness to give a crude product. To the crude product was added 100 ml of isopropanolStirred at 20 to 25C for 2 hours, and suction-filtered to obtain a white solid powder, which was dried to obtain 30.4 g of the product compound,Yield 90%,

Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol. 99395-88-7, if you are interested, you can browse my other articles.

Reference£º
Patent; Shanghai Heng Sheng Pharmaceutical Co., Ltd; Wang, Xilin; Ding, Zunliang; Wu, Huafeng; Zhang, Qingyun; (10 pag.)CN105439929; (2016); A;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

Analyzing the synthesis route of 695-53-4

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase.

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism., 695-53-4, If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular. 695-53-4, name is 5,5-Dimethyloxazolidine-2,4-dione. A new synthetic method of this compound is introduced below.

695-53-4, General procedure: To a solution of 4-methoxybenzoyl chloride (0.307 g, 1.80 mmol) in dry THF (6.6 mL) was added a solution of triethylamine (1.80-2.7 mmol) in dry THF (0.4 mL). After stirring for 10 min at room temperature, the appropriate oxazolidine-2,4-dione (2.7 mmol of crude 7a or 1,16 mmol of 5,5-dimethyloxazolidinedione or 7b) was added to the reaction mixture and the resulting solution was refluxed for 17-20 h. The synthesis of 4g was monitored by 1H-NMR. After filtration of the reaction mixture, the solvent was evaporated and the residue obtained was purified by chromatography or by recrystallization.

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase.

Reference£º
Article; Santana, Ana Bela; Lucas, Susana D.; Goncalves, Lidia M.; Correia, Henrique F.; Cardote, Teresa A.F.; Guedes, Rita C.; Iley, Jim; Moreira, Rui; Bioorganic and Medicinal Chemistry Letters; vol. 22; 12; (2012); p. 3993 – 3997;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

Analyzing the synthesis route of 108149-63-9

108149-63-9, This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 108149-63-9. We look forward to the emergence of more reaction modes in the future. 108149-63-9

One of the major reasons is to use measurements of the macroscopic properties of a system, the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 108149-63-9, introduce a new downstream synthesis route., 108149-63-9

tert-Butyl (4R)-4-{ [(4-chlorophenyl)sulfanyl] methyl}-2,2-dimethyl-l ,3- oxazolidine-3-carboxylate (K.1). Step 1. Methanesulfonyl chloride (0.40 ml, 5.19 mmol) was added dropwise to a stirred solution of tert-butyl (45)-4-(hydroxymethyl)-2,2-dimethyl-l,3- oxazolidine-3-carboxylate [prepared as for its enantiomer, Dondoni, et al.13] (1.00 g, 4.32 mmol) and triethylamine (1.22 ml, 8.65 mmol) in CH2CI2 (15 mL) at 0 C. The mixture was warmed to rt and stirred for 20 min then washed with sat aHC03 (3 x 5 mL), dried, and the solvent evaporated to give the crude mesylate as an oil (1.22 g, 3.94 mmol)., 108149-63-9

108149-63-9, This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 108149-63-9. We look forward to the emergence of more reaction modes in the future. 108149-63-9

Reference£º
Patent; ALBERT EINSTEIN COLLEGE OF MEDICINE OF YESHIVA UNIVERSITY; SCHRAMM, Vern, L.; CLINCH, Keith; GULAB, Shivali, Ashwin; WO2015/123101; (2015); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

Brief introduction of 80-65-9

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 80-65-9, you can also browse my other articles.

A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 80-65-9, name is 3-Aminooxazolidin-2-one, introduce a new downstream synthesis route as follows., 80-65-9

General procedure: Following the addition of 4-(4-fluorophenoxy) butyric acid (0.71 g, 3.6 mmol) to 20 mL ofdichloromethane in a 50 mL three-necked round-bottom flask, thesolution was agitated until dissolution. Subsequently, EDCI (0.85 g,4.44 mmol) HOBt (0.6 g, 4.44 mmol) and triethylamine (0.84 g,9.25 mmol) were added in turn at 0 C. Stirring in an ice bath for 1 h,3-amino-2-oxazolidinone (0.37 g, 3.6 mmol) was added again. Thesolutionwas brought to 25 C and stirred overnight. Following TLC,the product was filtered by vacuum and dried under rotary evaporation.The product was a white solid weighing 0.51 g with a yieldof 50.2%., 80-65-9

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 80-65-9, you can also browse my other articles.

Reference£º
Article; Jiang, Kai; Yan, Xinlin; Yu, Jiahao; Xiao, Zijian; Wu, Hao; Zhao, Meihua; Yue, Yuandong; Zhou, Xiaoping; Xiao, Junhai; Lin, Feng; European Journal of Medicinal Chemistry; vol. 194; (2020);,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

Simple exploration of 695-53-4

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 695-53-4, you can also browse my other articles.

One of the major reasons is to use measurements of the macroscopic properties of a system, the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 695-53-4, introduce a new downstream synthesis route., 695-53-4

Preparation of 2-[3-(1-adamantyl)-2-(5,5-dimethyl-2,4-dioxooxazolidinyl)-3-oxopropanamido]-4-nitroanisole [5] A suspension of 16.28 g (0.04 mol) of [4], 5.17 g (0.04 mol) of 5,5-dimethyloxazolidine-2,4-dione, and 16.58 g (0.12) mol of anhydrous potassium carbonate in 380 mL of dried acetone was refluxed for 3 hours. Thin layer chromatographic analysis indicated that the reaction was complete. The reaction mixture was concentrated in vacuoto yield an orange-colored solid. It was dissolved in ethyl acetate and the organic layer was washed with HCl (10%) and brine until neutrality. The organic layer was dried, filtered, and concentrated to yield an oil which solidified upon standing. It was triturated in ligroin. The final dried product (15.92 g, 79.8%) gave one spot on TLC. All analytical data confirmed the assigned structure., 695-53-4

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 695-53-4, you can also browse my other articles.

Reference£º
Patent; EASTMAN KODAK COMPANY; EP1014186; (2000); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

Downstream synthetic route of 95715-86-9

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 95715-86-9 if you are interested.

95715-86-9, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular. 95715-86-9, name is Methyl (R)-N-Boc-2,2-dimethyloxazolidine-4-carboxylate. A new synthetic method of this compound is introduced below.

95715-86-9, 4-Hydroxymethyl-2,2-dimethyl-oxazolidine-3-carboxylic acid tert-butyl ester (12b); A 250-ml two-necked flask was equipped with a magnetic stirring bar, reflux condenser bearing a drying tube and a dropping funnel. The flask was charged with tetrahydrofuran (100 ml) and lithium aluminium hydride (2.16 g, 57.0 mmol). While the suspension in the flask was stirred, a solution of the ester 12a (9.90 g, 38.2 mmol) in THF (50 ml) was added dropwise during 20 min. The reaction was monitored by thin layer chromatography. When the reaction was finished, the mixture was cooled in an ice bath and a solution of 10% potassium hydroxide (20 ml) was added dropwise during 10 min. The mixture was stirred for 2 h at room temperature, whereafter the white precipitate was removed by filtration through celite. The combined organic filtrates were washed with 100 ml of aqueous phosphate buffer (pH 7), and the aqueous layer was extracted with ether. The combined organic phases were dried and concentrated which gave the title compound (8.3 g, 94%). The residue was used without further purification.

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 95715-86-9 if you are interested.

Reference£º
Patent; MEDIVIR AB; WO2008/107365; (2008); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

Simple exploration of 16251-45-9

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about16251-45-9

16251-45-9, One of the major reasons is to use measurements of the macroscopic properties of a system, the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 16251-45-9, introduce a new downstream synthesis route.

2a (4S,5R)-3-(Bromoacetyl)-4-methyl-5-phenyloxazolidin-2-one Production is carried out analogously to Example 1a) starting from (4S,5R)-4-methyl-5-phenyloxazolidin-2-one. The coverage of NMR is identical to 1a)., 16251-45-9

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about16251-45-9

Reference£º
Patent; KLAR, ULRICH; SCHWEDE, WOLFGANG; SKUBALLA, WERNER; BUCHMANN, BERND; US2003/144523; (2003); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

New learning discoveries about 108149-63-9

Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol. 108149-63-9, if you are interested, you can browse my other articles.

108149-63-9, We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 108149-63-9, name is (R)-tert-Butyl 4-(hydroxymethyl)-2,2-dimethyloxazolidine-3-carboxylate,below Introduce a new synthetic route.

General procedure: To a stirred solution of 39 (0.100g, 0.433mmol), appropriate substituted phenol (0.649mmol) and PPh3 (0.182g, 0.693mmol) in anhydrous toluene (5mL) was added DIAD (0.14mL, 0.693mmol) at 80C. After 3h, EtOAc (40mL) was added to the resulting solution. The organic layer was washed with 0.5M aqueous NaOH (40mL) and water (2¡Á40mL), dried over Na2SO4, filtered and concentrated. The residue was purified by flash silica gel column chromatography eluting with Hexanes/EtOAc (9:1) or (95:5)., 108149-63-9

Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol. 108149-63-9, if you are interested, you can browse my other articles.

Reference£º
Article; Andrade, Saulo F.; Oliveira, Barbara G.; Pereira, Larissa C.; Ramos, Jonas P.; Joaquim, Angelica R.; Steppe, Martin; Souza-Fagundes, Elaine M.; Alves, Ricardo J.; European Journal of Medicinal Chemistry; vol. 138; (2017); p. 13 – 25;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

 

Simple exploration of 90319-52-1

Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol. 90319-52-1, if you are interested, you can browse my other articles.

#REF!

(4R)-3-[(2Z)-[4-[(1,1-Dimethylethyl)dimethylsilyl]oxy]-1-oxo-2-buten-1-yl]-4-phenyl-2-oxazolidinone (7) To a solution of acid 6 (6.0 g, 28.2 mmol) in THF (40 mL) at -78 C., was added triethylamine (4.00 mL, 28.2 mmol) followed by trimethylacetyl chloride (3.46 mL, 28.2 mmol) drop-wise. The mixture was warmed to 0 C. over 20 minutes, then the anhydride mixture was cooled to -78 C. Separately, to a solution of (R)-(+)-phenyl-2-oxazolidione (Aldrich) (4.60 g, 28.2 mmol) in THF (40 mL) at -78 C. was carefully added n-BuLi (2.50 M in THF, 11.3 mL, 28.2 mmol) and the mixture was stirred (30 minutes) then transferred to the anhydride solution at -78 C. The final reaction mixture was warmed to room temperature and stirred (over night). The mixture was diluted with EtOAc (200 mL), washed (H2O and brine), dried (Na2SO4), and purified by silica gel column chromatography (hexanes:EtOAc) to yield 7 as a colorless oil (10.2 g, 100% yield). 1H NMR (400 MHz, CDCl3) delta 7.36-7.20 (m, 5H), 7.10 (dt, J=11.6, 2.6 Hz, 1H), 6.50 (dt, J=12.0, 4.6 Hz, 1H), 5.44 (dd, J=8.8, 4.0 Hz, 1H), 4.68-4.59 (m, 3H), 4.22 (dd, J=8.8, 4.0 Hz, 1H), 0.85 (s, 9H), 0.00 (s, 6H). 13C NMR (100 MHz, CDCl3) delta 169.3, 160.6, 158.8, 144.3, 134.5, 134.0, 131.0, 122.0, 75.2, 67.9, 62.8, 31.1, 23.4, 0.00. ESI (+VE) m/z: 384.1 (M+Na)+. HR-ESI cacld for C19H28NO4Si (M+Na)+: 362.1782, Found: 362.1789.

Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol. 90319-52-1, if you are interested, you can browse my other articles.

Reference£º
Patent; The United States of America, as represented by the Secretary, Department of Health & Human Services; Burke, Jr., Terrence R.; Liu, Fa; Lee, Kyung S.; Park, Jung-Eun; (182 pag.)US10266565; (2019); B2;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem