Day: October 9, 2020

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.95715-86-9,Methyl (R)-N-Boc-2,2-dimethyloxazolidine-4-carboxylate,as a common compound, the synthetic route is as follows.

95715-86-9, Preparation of (S)-2-amino-/V-(7-ethoxy-4-(3,4,5-trimethoxybenzyl)isoquinolin-8-yl)-3- hvdroxypropanamide dihydrochloride 26 (S)-3-( e/t-Butoxycarbonyl)-2,2-dimethyloxazolidine-4-carboxylic acidTo a solution of methyl (S)-3-terf-butyl 4-methyl 2,2-dimethyloxazolidine-3,4- dicarboxylate (0.35 g, 1 .35 mmol) in THF (10 mL) in a 50 mL round-bottomed flask equipped with a magnetic stirrer was added a solution of LiOH monohydrate (62 mg, 1 .48 mmol) in H2O (5 mL) and the mixture was stirred overnight at RT. THF was evaporated at 40C under vacuum and the residue was diluted with H2O (25 mL) before acidification with 3% aqueous HCI to pH = 4. The solution was extracted with Et2O (3×50 mL) and the organic layers were combined, washed with brine (20 mL), dried over Na2SO4, filtered and concentrated at 40C under vacuum to give (S)-3- (fe/t-butoxycarbonyl)-2,2-dimethyloxazolidine-4-carboxylic acid CCH 34168-1 as a colorless oil (147 mg, 44% yield).CCH 34168-1MW: 469.4; Yield: 21 %; Colorless oil.

As the paragraph descriping shows that 95715-86-9 is playing an increasingly important role.

Reference£º
Patent; EXONHIT S.A.; LEBLOND, Bertrand; TAVERNE, Thierry; BEAUSOLEIL, Eric; CHAUVIGNAC, Cedric; CASAGRANDE, Anne-Sophie; DESIRE, Laurent; WO2011/151423; (2011); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

108149-63-9, (R)-tert-Butyl 4-(hydroxymethyl)-2,2-dimethyloxazolidine-3-carboxylate is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a stirred solution of 39 (0.100g, 0.433mmol), appropriate substituted phenol (0.649mmol) and PPh3 (0.182g, 0.693mmol) in anhydrous toluene (5mL) was added DIAD (0.14mL, 0.693mmol) at 80C. After 3h, EtOAc (40mL) was added to the resulting solution. The organic layer was washed with 0.5M aqueous NaOH (40mL) and water (2¡Á40mL), dried over Na2SO4, filtered and concentrated. The residue was purified by flash silica gel column chromatography eluting with Hexanes/EtOAc (9:1) or (95:5).

108149-63-9, 108149-63-9 (R)-tert-Butyl 4-(hydroxymethyl)-2,2-dimethyloxazolidine-3-carboxylate 11053464, aoxazolidine compound, is more and more widely used in various fields.

Reference£º
Article; Andrade, Saulo F.; Oliveira, Barbara G.; Pereira, Larissa C.; Ramos, Jonas P.; Joaquim, Angelica R.; Steppe, Martin; Souza-Fagundes, Elaine M.; Alves, Ricardo J.; European Journal of Medicinal Chemistry; vol. 138; (2017); p. 13 – 25;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

875444-08-9, (4S,5R)-5-(3,5-Bis(trifluoromethyl)phenyl)-4-methyloxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

875444-08-9, (45,5R)-5-[3,5-Z?w(trifluoromethyl)phenyl]-4-methyl-l,3-oxazolidin-2-one (400 mg, 1.28 mrnol) was treated with NaH (60% in oil, 128 mg, 3.2 mmol) and 2-(bromomethyl)-l-iodo-4- (trifluoromethyl)benzene (Example 70, 466 mg, 1,28 mmol) as described in Example 66 to afford (45,5i.)-5-[3,5-Akappa(trifluoromethyl)phenyl]-3-[2-iodo-5-(trifluoromethyl)benzyl]-4-methyl-l,3- oxazolidin-2-one as a white solid. LCMS = 598.0 (M+l)+. lH NMR (CDCI3, 500 MHz): delta 8.06 (d, J=8.2 Hz, 1 H), 7.93 (s, 1 H), 7.82 (s, 2 H), 7.61 (s, 1 H), 7.33 (dd, J= 8.2, 1.4 Hz, 1 H), 5.79 (d, J= 7.8 hz, 1 H), 4.91 (d, J= 16 Hz, 1 H), 4.40 (d, J= 16 Hz, 1 H), 4.16-4.06 (m, 1 H), 0.83 (d, J= 6.4 Hz, 3 H).

The synthetic route of 875444-08-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MERCK & CO., INC.; WO2007/79186; (2007); A2;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

497-25-6, Oxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

497-25-6, General procedure: General nitration procedure.12-14 A steel autoclave (25 cm3) equippedwith sapphire windows containing urethane 1c or amide 3 or 5 (10.0 mmol)was filled with liquid CO2 to 60 bar pressure and cooled to 0 C. ThenN2O5 (2.4 g, 22.0 mmol) solution in liquid CO2 (~ 4 g) cooled to 0-5 Cwas gradually pressed out from an auxiliary high-pressure cell by a freshCO2 flow (2 g min-1) to the reaction autoclave. During the addition, thepressure in the latter raised up to 80 bar. The reaction mixture was stirredat 0-5 C for the time specified in Table 1. Then, CO2 was removed bydecompression and the residue was poured onto ice water (50 ml). Theresulted suspension was extracted with EtOAc (4 ¡Á 20 ml), the combinedorganic extracts were washed successively with saturated aqueous NaHCO3(2 ¡Á 20 ml) and water (25 ml) and dried over anhydrous Na2SO4. Thesolvent was removed under reduced pressure to afford corresponding nitrocompounds 2, 4 (see Table 1). Compounds 2a,b and 7 were synthesizedby similar procedures using 1.2 g (11.0 mmol) or 6.0 g (55 mmol) ofN2O5, respectively.

The synthetic route of 497-25-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Kuchurov, Ilya V.; Fomenkov, Igor V.; Zlotin, Sergei G.; Tartakovsky, Vladimir A.; Mendeleev Communications; vol. 23; 2; (2013); p. 81 – 83;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

95530-58-8, (R)-4-Isopropyloxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,95530-58-8

A mixture of 2-(3-bromo-phenyl)-3,3-dimethyl-1,2,3,4-tetrahydro-quinoline-6-carboxylic acid (600 mg, 1.7 mmol), (R)-4-isopropyl-2-oxazolidinone (322 mg, 2.5 mmol), copper(I) iodide (96 mg, 0.5 mmol), N,N-dimethylglycine hydrochloride (140 mg, 1.0 mmol) and potassium carbonate (923 mg, 6.7 mmol) in dimethyl sulfoxide (5 mL) was stirred at 120 C. for 16 h. Then the reaction mixture cooled to room temperature. The reaction mixture was extracted with ethyl acetate (2¡Á150 mL), washed with water (2¡Á50 mL) and saturated aqueous ammonium chloride solution (2¡Á50 mL), dried over anhydrous sodium sulfate and then concentrated in vacuo. Purification by Waters automated flash system (column: Xterra 30 mm¡Á100 mm, sample manager 2767, pump 2525, detector: ZQ mass and UV 2487, solvent system: acetonitrile and 0.1% ammonium hydroxide in water) afforded 2-[3-((R)-4-isopropyl-2-oxo-oxazolidin-3-yl)-phenyl]-3,3-dimethyl-1,2,3,4-tetrahydro-quinoline-6-carboxylic acid (555 mg, 80%) as a white solid: LC/MS m/e calcd for C24H28N2O4 (M+H)+: 409.50, observed: 409.1.

The synthetic route of 95530-58-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Chen, Li; Feng, Lichun; Huang, Mengwei; Liu, Yongfu; Wu, Guolong; Wu, Jim Zhen; Zhou, Mingwei; US2011/257151; (2011); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.95715-86-9,Methyl (R)-N-Boc-2,2-dimethyloxazolidine-4-carboxylate,as a common compound, the synthetic route is as follows.

95715-86-9, To a mixture of NaBH4 (2.247 g, 59.08 mmol) and LiCI (2.505 g, 59.08 mmol) in EtOH (42 mL), stirring under nitrogen at 0C, was added (35) (7.659 g, 29.54 mmol) in THF (30 mL) dropwise. This mixture was allowed to warm to room temperature and continued stirring for 48 hours. The precipitate was filtered and washed with ethanol. The washings were concentrated and extracted with EtOAc. The organic layer was then washed with brine and dried over anhydrous Na2S04. Column chromatography on SiO2 (1 : 1 EtOAc/Hexanes) was utilized to purify 6.101 g (89%) of the title compound as a white solid.

As the paragraph descriping shows that 95715-86-9 is playing an increasingly important role.

Reference£º
Patent; UNIVERSITY OF VIRGINIA PATENT FOUNDATION; WO2005/41899; (2005); A2;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

90719-32-7, (S)-4-Benzyloxazolidin-2-one is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

90719-32-7, (S)-4-Benzyl-2-oxazolidinone Compound H (40 g, 226 mmol) was taken in a 1 L round bottom flask, 450 mL THF was added and the system was placed at -78 C. To this was slowly added (100 mL, 248.6 mmol) of n-butyllithium.The mixed system was stirred at -78 C for 30 min, then propionyl chloride (25 g, 270 mmol) was added.The reaction system was reacted at -78 C and then gradually warmed to room temperature. The reaction was monitored by TLC until the reaction was complete. The reaction was quenched with saturated aq. The combined organic phases were dried with sodium sulfate, filtered and evaporatedThe column was then separated to give a white solid J.

90719-32-7 (S)-4-Benzyloxazolidin-2-one 736225, aoxazolidine compound, is more and more widely used in various fields.

Reference£º
Patent; Ocean University of China; Xu Tao; Yu Haiyong; Zong Yan; (21 pag.)CN108484631; (2018); A;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

2346-26-1, Oxazolidine-2,4-dione is a oxazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,2346-26-1

solution of 0.5 g (1.96 mmol) of 3-chloro-4-(chloromethyl)-4′-fluoro-1,1′-biphenyl, prepared in step 5.3., 0.240 g (2.35 mmol) of 1,3-oxazolidine-2,4-dione and 0.45 g (3.92 mmol) of 1,1,3,3-tetramethylguanidine in 10 ml of tetrahydrofuran is refluxed for 18 hours. The mixture is allowed to return to ambient temperature and is concentrated under reduced pressure. The residue is taken up in dichloromethane and water and the aqueous phase is separated and extracted twice with dichloromethane. The combined organic phases are washed with saturated aqueous sodium chloride solution and dried over sodium sulphate. Following evaporation of the solvent the residue obtained is purified by chromatography on silica gel, eluting with a 20/80 mixture of ethyl acetate and cyclohexane. This gives 0.33 g of pure product in the form of a white solid. m.p. ( C.): 108-110 C.

As the paragraph descriping shows that 2346-26-1 is playing an increasingly important role.

Reference£º
Patent; Sanofi-Aventis; US2006/14830; (2006); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.695-53-4,5,5-Dimethyloxazolidine-2,4-dione,as a common compound, the synthetic route is as follows.

695-53-4, General procedure: To a solution of 4-methoxybenzoyl chloride (0.307 g, 1.80 mmol) in dry THF (6.6 mL) was added a solution of triethylamine (1.80-2.7 mmol) in dry THF (0.4 mL). After stirring for 10 min at room temperature, the appropriate oxazolidine-2,4-dione (2.7 mmol of crude 7a or 1,16 mmol of 5,5-dimethyloxazolidinedione or 7b) was added to the reaction mixture and the resulting solution was refluxed for 17-20 h. The synthesis of 4g was monitored by 1H-NMR. After filtration of the reaction mixture, the solvent was evaporated and the residue obtained was purified by chromatography or by recrystallization.

The synthetic route of 695-53-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Santana, Ana Bela; Lucas, Susana D.; Goncalves, Lidia M.; Correia, Henrique F.; Cardote, Teresa A.F.; Guedes, Rita C.; Iley, Jim; Moreira, Rui; Bioorganic and Medicinal Chemistry Letters; vol. 22; 12; (2012); p. 3993 – 3997;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.497-25-6,Oxazolidin-2-one,as a common compound, the synthetic route is as follows.,497-25-6

A mixture of 2-(3-bromo-phenyl)-6-chloro-4,4-dimethyl-1,2,3,4-tetrahydro-quinoline-8-carboxylic acid methyl ester (1 g, 2.5 mmol), oxazolidin-2-one (230 mg, 2.63 mmol), copper(I) iodide (95 mg, 0.5 mmol), N,N’-dimethyl-ethane-1,2-diamine (0.11 mL, 1 mmol), and potassium carbonate (1.04 g, 7.5 mmol) in dimethyl sulfoxide (10 mL). The reaction mixture was stirred at 120 C. for 16 h. Then the reaction mixture cooled to room temperature. The reaction mixture was extracted with ethyl acetate (2¡Á50 mL), washed with water (2¡Á20 mL) and saturated aqueous ammonium chloride solution (2¡Á20 mL), dried over anhydrous sodium sulfate and then concentrated in vacuo. Purification by Waters automated flash system (column: Xterra 30 mm¡Á100 mm, sample manager 2767, pump 2525, detector: ZQ mass and UV 2487, solvent system: acetonitrile and 0.1% ammonium hydroxide in water) afforded 6-chloro-4,4-dimethyl-2-[3-(2-oxo-oxazolidin-3-yl)-phenyl]-1,2,3,4-tetrahydro-quinoline-8-carboxylic acid (0.8 g, 80%) as a white solid: MS (ESI) M+1=400.1.

The synthetic route of 497-25-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Feng, Lichun; Huang, Mengwei; Liu, Yongfu; Wu, Guolong; Yan, Shixiang; Yun, Hongying; Zhou, Mingwei; US2012/190677; (2012); A1;,
Oxazolidine – Wikipedia
Oxazolidine | C3H7NO – PubChem